Anytone At 588 Vhf Manually Reset

Anytone At 588 Vhf Manually Reset Average ratng: 9,0/10 4427 votes

The Support Center for AnyTone Tech Radios. Our Software is designed for Windows Operating Systems. Mac OSX and Linux users are recommended to use a Virtual Machine to run our Windows programming software.

• Do not transmit with high output power for extended periods; the transceiver may overheat. ATTENTION: Models Apply To This Manual: AT-5189 Mobile radio When programming the transceiver, read the factory initial data first, then rewrite the frequency, otherwise AT-5189 Mobile Radio Applicable Software: QPS589. • CONTENTS SUPPLIED ACCESSORIES/OPTIONAL ACCESSORIES.1 Channel Edit..12 PREPARATION.2 Channel Copy.12 Mobile Installation.2 Channel Delete.12 DC Power Cable Connection.3 Channel Name Edit.13 Mobile Operation.3 Short Call.13 Fixed Station Operation.4 Frequency/Channel Scan.13 Replacing Fuses. • CONTENTS TROUBLE SHOOTING.32 Talk Around.21 SPECIFICATIONS.33 High/Mid/Low Power Switch.21 TX Off Setup..21 Compander (Reduce noise, Improve communication quality).21 Scrambler Setup( Encryption) Optional.22 BACKGROUND OPERATIONS.23 Voice Prompt.23 TOT (Time-out Timer).23 APO (Auto Power Off).23 Busy Channel Lockout.24 DTMF Transmitting Time Setup.24 Squelch Setup.24.

• After carefully unpacking the transceiver, identify the items listed in Programming Cloning cable Programming the table below. We recommend you keep the box and packaging for cable (PC51) (CP51) software (QPS589) shipping.

AT-5189 Vehicle transceiver Microphone (QHM-02) Regulated power DTMF Microphone External Speaker supply (QRP-01) (SP-01) (QHM-04) • PREPARATION Mobile installation To install the transceiver, select a safe, convenient location inside your vehicle that minimizes danger to your passengers and yourself while the vehicle is in motion. Consider installing the unit at an appro- priate position so that knees or legs will not strike it during sudden bra- king of your vehicle. • PREPARATION Confirm the correct polarity of the connections, then attach the DC Power Cable Connection power cable to the battery terminals; red connects to the positive (+) Note: terminal and black connects to the negative (-) terminal. Locate the power input connector as close to the transceiver as •.

• PREPARATION ♦ Connect the transceiver's DC power connector to the connector Fixed Station Operation on the DC power cable.Press the connectors firmly together until In order to use this transceiver for fixed station 1 operation, you will the locking tab clicks. Need a separate 13.8 V DC power supply (not included). • PREPARATION Fuse Location Fuse Current Rating antenna to the transceiver before transmitting. Transceiver • All fixed stations should be equipped with a lightning arrester Supplied Accessory DC to reduce the risk of fire, electric shock, and transceiver damage. Power cable Caution: Only use fuses of the specified type and rating. • PREPARATION ♦ Accessories Connections Microphone For voice communications, connect a microphone equipped with an ♦ External Speaker 8-pin modular plug into the modular socket on the front of the main If you plan to use an external speaker, choose a speaker with an unit.

• GETTING ACQUAINTED Front Panel Note: This section describes only the main functions of the front panel controls. Explanations for functions not described here are provided in the appropriate sections of this instruction manual. Otveti na testi po sanminimumu dlya provodnikov.

Power switch /Volume control/Selector knob V/M Key •. • GETTING ACQUAINTED Microphone Rear Panel Antenna Connector DOWN Key • Connect an external antenna [ page 5] here. When transmitting, • Adjust down in relevant setup. The antenna system or load should have an impedance of 50 Ω. UP Key 13.8V DC Cable •. • WORKING MODE NOTE: This product has 4 working modes and 3 levels of operating menu.

(1) Frequency + channel mode: Under this mode, press key to edit current channel function for temporary use, ENTER temporary channel information will be automatically deleted when power off or change channel. Horoshij shrift dlya beguschej stroki. In this mode, all shortcut setup are temporary change and unable be stored, except press key then press SQ/C. • OPERATING BASICS Switching The Power On/Off In relevant modes,the Microphone [UP/DWON] key have the same Press the selector knob once to switch on the transceiver while function of adjusting frequency or edited channel.(this transceiver switch off, Press and hold it for 3 seconds to switch off while standby. Shows only edited channels). • OPERATING BASICS Transmitting According to different setup of key, press and hold key to SQ/C SQ/C monitor for a while to confirm the channel desired is not busy. Then, press and hold [PTT] key to speak into microphone.