Australia Map For Igo8 Update
Hi Guys, Don't kill the newbie here. I have tried looking everywhere on this site to try and upgrade my Ford Sat Nav. Lots for handheld devices, but not too much for in-car systems. I have tried using the handheld maps, but that doesn't seem to work very well.
For 4x4 enthusiasts, upgrade the 4GB SD card for licensed iGO Primo GPS software with latest Australia and New Zealand map to 8GB SD card for AU $15 with.
(Hey, thought id give it a go. You never know I guess) Anyhow, listed below is currently what my Sat Nav is running, (according the Sat Nav information screen) and I do believe that R18 for Australia has been released. Info: Nav'n'Go iGo 8 (8.3.4.102680) (August 13 2009 to be exact) Current Map: Australia R17 (Whereis data map 100211) Basemap: 2009.09 (090930) Whereis Map Data: Nxx R5 (090708) Note: This is all off a HiTV Touch screen unit. Can anyone help or possibly point me in the right direction. Maps, information, how to update.
Anything would be appreciated! First of all, if your device is using a legally licensed copy of iGO8, you won't simply be able to update the maps unless you can legally obtain them from NNG. Any maps that you download from the internet won't work on a legal copy.
Contoh laporan program. However if your copy of iGO8 is a hacked version (which it probably is if it's a Chinese unit) then it is just a matter of replacing the existing R17 map with the R18 version. So you just need to source a copy of R18 and give it a try. If it won't work you will need to acquire a hacked version of iGO8 to replace the version on your unit. Thanks for the reply Ian. I have been looking everywhere to try and update this unit and have had no luck. I have managed to source a version of R18 (Australia) but they its a version for hand-held GPS units.
I assume they (the versions for hand-helds) are different to in-car GPS systems as I have tried to just copy the maps across and that didnt work. I would then have to believe that it is a legit copy of R17 on my unit and IGO from NNG. I don't know where I'm supposed to be looking for any hacked versions of iGO to replace whats currently on my unit. Thanks for the heads up. I know this may sound like a dumb question, but. What do you mean access Windows CE? Noobie question I am sure, (dont kill me.
I am slowly getting my knowledge up) but do you mean as I have a copy of Windows CE? If need be, I can get my hands on a PDA that runs Windows CE if thats what you are asking? My GPS is not a hand held (though Im sure you know that), it is an in-car GPS system. Now, Its not a ford proprietary device. I had it installed 'after market'.
The only thing proprietary about it I guess, is that it plugs directly into the Ford screen. I can eject the SD card from my device, load via an SD reader from windows and access all the files on the SD card. It does have a folder on the device 'dev_wince_core_runtime'.
Obrazec resheniya edinstvennogo uchreditelya o likvidacii too v rk8364750. How can I find out if I can select the path from which to run the navi? I dont know if its unlocked. I would love to give you that info, however, I dont know how to check that? It does have a file called WP_NAVI.exe which wont execute under Windows XP as it says its not a valid 32-bit file. Possibly a windows CE file?
I am a noobie. Thanks for this guys. Very much appreciated. Many heads is better than one! The below link is my dir structure that I see when the SD card is in my laptop. Now, one thing i did try (although Im not sure if i did it correctly) was to just copy across maps from a hand-held device to my in-car system.
It didnt like that at all. But again, not sure if i was doing it right. Lucky for me I have a habit of backing things up, so that wasn't an issue.
PS Hope the image upload worked correctly. If not, let me know and ill do it again. PS I think the 1wp_navi folder is the older maps that were originally on the SD Card if i remember correctly. I have had it once updated legitimately. Hey guys, was just reading your conversations regarding R18. I have just acquired a cheap chinese system running Windows CE v5.0 loaded with Igo8 satnav. When I set it up I had to click on the.exe file to set it up so Im guessing its not locked.
Does anyone know where I can download the R18 maps? And how will I know if its compatible with my version of Igo8. Like Voodoo Im a bit of a novice with this stuff. Although maybe by now he knows a lot more. Regards, NewloIf you look at the posts below this you will see R18 map. You will find your version of igo in the menu under settings/about.
The map will work with any 8.3.up Bazzle.
Over the years, we have developed different versions of our iGO Navigation for PNDs (Personal Navigation Devices) and for Aftermarket devices, which are available at media outlets across the world. All of our past navigation software – iGO primo nextgen, iGO primo, iGO amigo, and iGO 8 – can still be purchased through some of our. As the feature set of our different software can vary from device to device, you may need further information about the software, support, and available maps and updates. If so, please get in touch with the manufacturer of your device or with the shop where you purchased it.